Tascam DR-100 MKII

The rugged TASCAM DR-100mkII offers high-end recording features to musicians and engineers who demand more from their portable recorder. It features four built-in microphones, two cardioid and two omnidirectional, for great sounding recordings. A pair of XLR microphone inputs with phantom power welcomes pro-grade condenser microphones, and line in and out connectors are also provided. The markII version adds balanced line ins, S/PDIF digital inputs, locking connectors and more.

Main Features

    +4dBu (maximum +24dBu) line input available via XLR jack
    XLR jack with a locking latch for professional use
    Better quality uni-directional and omni-directional microphones than the original DR-100
    Accepts digital input signal from an external digital device via remote jack
    Improved Mic pre amp with higher gain and lower noise
    Up to 96kHz/24-bit WAV recording
    32 to 320kbps MP3 recording
    XLR or RCA 1/8” line input
    S/PDIF digital power
    Wired/wireless remote control included (RC-10)
    Limiter and low cut filter
    Back panel dedicated switches
    Rugged aluminum casing
    VSA changes playback speed from -50% to +16%
    Records to SD or SD-HC card (2GB card included)
    Mini USB 2.0 jack and cable
    Large thumbwheel individual gain control
    Built-in speaker
    Tripod Mount
    Included Li-ion battery, windscreen and carrying case

DR-100MKII SPECIFICATIONS

Recording Media     SD card（64MB～2GB), SDHC card（4GB～32GB）
File System     FAT16/32
File Format     WAV、MP3

Recording/Playback Format
     
WAV     44.1/48/96 (HS mode) kHz, 16/24-bit
MP3     44.1/48kHz, 32/64/96/192/256/320kbps
Number of Channels     2 channels（stereo）
Playback Speed Control (VSA)     -50% - +16%（1% step）
Analog Input      
MIC/LINE 1 IN (XLR)
(Phantom Power Compatible)     XLR-3-31 （1：GND, 2：HOT, 3：COLD）
MIC (Switch is set to MIC)      
Input Impendance     2.1kΩ
Nominal Input Level     −14dBu
Maximum Input Level     +2dBu
LINE 1 (Switch is set to LINE )      
Input Impendance     2.5kΩ
Nominal Input Level     +4dBu
Maximum Input Level     +24dBu
LINE 2 IN      
Connetor     1/8"（3.5mm）stereo mini jack
Input Impedance     22 kΩ or more
Nominal Input Level     −10dBV
Maximum Input Level     +6dBV
Analog Output      
LINE OUT
(XLR LINE IN)      

Connector
    1/8"（3.5mm）stereo mini jack

Output Impendance
    200 kΩ
Nominal Output Level     －14dBV
Maximum Output Level     ＋6dBV
Headphone Output     1/8"（3.5mm）stereo mini jack
Connector     25mW+25mW（With 32Ω headphone connection）
Maximum Output     25mW+25mW（With 32Ω headphone connection）
Built-in Speaker     0.4W (mono)
Digital Input     3/32” (2.5 mm) TRS jack (using the conversion cable made for this unit)
Format     IEC60958-3（S/PDIF）
USB     Mini-B type
Format     USB2.0 HIGH SPEED mass storage class
REMOTE     3/32” (2.5 mm) TRS jack
Power Supply     Lithium-ion rechargeable battery made for this unit (TASCAM BP-L2)
Two AA batteries (Alkaline or Ni-MH batteries)
AC adaptor (TASCAM PS-P520, sold separately)
External battery pack (TASCAM BP-6AA, sold separately)
Power Consumption     4W（maximum）
Battery Life
（Continuous Operation）      
Lithium ion batteries (BP-L2)    

Built-in mics（UNI／OMNI）
    About 5 hours（Recording WAV, 44.1kHz, 16 bit）

Ni-MH batteries
（eneloop）    

Built-in mics（UNI／OMNI）
    About 4 hours（Recording WAV, 44.1kHz, 16 bit）

Dimensions
(w x h x d)    

3.15 x 6.024 x 1.378 inch / 80 x 153 x 35 mm
Weight     10.23 oz. / 290g（without batteries）